METRA 99-5827B "FACTORY NON-AMPLIFIED" COMBO AFTERMARKET DOUBLE/SINGLE DIN RADIO INSTALL KIT WITH FORD R. RETENTION INTERFACE AND ANTENNA ADAPTER "COMBO" FOR USE WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET RADIO.
THIS ITEM IS 100% BRAND NEW! Before you replace your factory radio with your new aftermarket radio, make sure you get the same parts a professional would use.Whether you're installing an Alpine, Blaupunkt, Clarion, JVC, Kenwood, Panasonic, Pioneer, Sony, Valor or another stereo, you'll want to get the right parts with the best fit and finish, get genuine Metra Products. Some "SELLERS" say they will send you what is "available" at the time. They substitute cheap, poor quality generic products for the Metra Harnesses and Antenna Adapters (when applicable). Wouldn't you rather get what you paid for? Don't fall for cheap substitutions that come in plain plastic bags, don't fit right and should cost a lot less. This Complete Radio Install Kit comes with good instructions on removing the factory radio as well as installing your new one. Factory Sealed Packaging and 100% BRAND NEW! Recently many radio manufacturers started making Double Din Radios with 7 inch screens (some slightly smaller). These Double Din Radios are about 7 inches wide x 4 inches tall.
Unfortunately this new size "DOES NOT" work with Metra Installation Kits without modifications. These kits have been manufactured for years before this new size radio became available.
As far as we know, none of the aftermarket kit manufacturers are using this new sized opening at this time. The standard radio opening for this kit is approximately 6 7/8 inches x 3 7/8 inches or 173mm x 98mm. If you have one of these larger radios, you will need to SAND or FILE the opening to make it larger. Unfortunately at this time there are no other alternatives that we know of. (Additional Features and Item Specifics Below).SHOWN IN DOUBLE DIN CONFIGURATION WITH AC PANELS ATTACHED. SHOWN IN SINGLE DIN WITH POCKET AND AC PANELS ATTACHED.
This kit comes standard with Matte Black AC Vent Panels as shown above. AFTERMARKET RADIO INSTALLATION DASH KIT AND R. RETENTION INTERFACE & ANTENNA ADAPTER. PAINTED BLACK MATTE TO MATCH FACTORY COLOR AND FINISH.
METRA RADIO INSTALLATION DASH KIT. Integrated Controls for INFO Center.
Heavy Duty ABS Plastic Construction. Plugs Into Car Harness at Radio. Provides 12 Volt 10 Amp Switched Voltage (Accessory) for Radio Operation. Includes Outputs for the Installation of a Navigation Radio. Provides Parking Brake, Reverse and Vehicle Speed Sense wires.
NOTE: Used in Non Amplified Factory Systems. European Factory Antenna With Mini-Style Plug to Aftermarket Radio. (1) Metra 99-5827B Radio Trim Panel.
(2) Carriage Bolts & Kep Nuts. (4) #8 X 3/8 Phillips Screws. We provide our services as a courtesy for International Buyers (ANYONE OUTSIDE THE USA).To research whether the part they are ordering will fit, work or is compatible, with their vehicle, before purchasing. The item "99-5827B Car Stereo Single & Double-Din Radio Install Dash Kit & Wires for Focus" is in sale since Wednesday, August 29, 2012.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Dash Parts". The seller is "honestdee" and is located in Seal Beach, California. This item can be shipped to United States.